• Software used for design of piles produced by Ruukki
• The software is intended to be operated by engineers or otherwise adequately qualified persons
• Program including structural design of axially loaded single RR or RD pile (RR/RD75…1220/20). Optional pile types include an empty steel pipe pile, concrete filled pile or a composite pile with concrete fill, reinforced concrete fill or concrete fill with an inner pipe. Geotechnical resistance check for driven steel piles is included (available if national piling code of Finland is used).
• Structural design of the pile is done according to applicable Eurocodes and National piling code of Finland (PO 2011), Sweden and Norge. Buckling capacity of the pile in soil failure and in structural failure are both examined.
• Structural resistance of the pile is compared with geotechnical resistance calculated according to the piling work class either using instructions for end-of-driving or dynamic load test (PDA) results (PO 2011). Target levels are given for the minimum and average dynamic load test (PDA) result to fulfill the required geotechnical capacity (available if National piling code of Finland is used).
• Software license automatic registration
• Automatic latest version check
• Languages: Finnish, English, Swedish
• Windows

• Installation instructions are available from here.

• Software used for design retaining walls produced by SSAB.
• The software is intended to be operated by engineers or otherwise adequately qualified persons.
• Program including calculation of structural bending capacity and stiffness of Combi-walls and zig-zag Combi-walls (RR/RD piles + sheet piles) and RD pile wall (RR/RD piles only). Optional pipe pile types include an empty steel pipe pile, concrete filled pile or a composite pile with concrete fill, reinforced concrete fill or concrete fill with an inner pipe.
• Automatic latest version check.
• Languages: Finnish, English

• Installation instructions are available from here.