Envelope and Deck Design Software
The results of these programs are only applicable for Ruukki's products. These programs should not be used for design of any other products than original Ruukki products. Ruukki will not guarantee in any way whatsoever that the structure will not collapse under the loads if these programs are used for other products than original Ruukki products. "Ruukki and Ruukki's product code" must be used in all designs and drawings etc.
By downloading and using the program you agree to these terms and conditions and the General Conditions for Using Software Toolbox Portal available at Terms & privacy as well as the license terms of the program.
The software are intended primarily to be operated by civil/structural engineers or otherwise adequately qualified persons.
It shall be the user's responsibility to verify that the results of any calculation and/or data processing carried out by the software are correct and that the results are verified as correct by a qualified civil/structural engineer or otherwise adequately qualified persons.
The use of different web-browser automatic translators IS NOT ALLOWED (e.g google translator) in order to translate the whole Software Toolbox Portal or any parts of it. This causes false navigation, terminology and instructions.
 |
Load bearing sheet design software - Poimu
• Software used for design of load bearing profiles produced by Ruukki
• Software that includes two interfaces: ‘Full designer version´ for detailed design and a simplified ‘Easy and quick pre-selection version’ for fast product selection and optimisation
• The software is intended to be operated by civil/structural engineers or otherwise adequately qualified persons
• Software that enables capacity verifications for the service limit state and ultimate limit state also including stressed skin design and fastener design
• Design codes: Fin B6, Swe N5, No NS, Dk DS, ENV 1993-1-3, EN 1993-1-3, DIN
• Software license automatic registration
• Automatic latest version check
• Languages: Finnish, English, Swedish, Polish, Czech, Slovak, Hungary, Romanian, Russia
• Windows
• Installation instructions are available from here.
MORE INFO  |
|
0,00€
vat 0.0%
FULL DESIGNER VERSION
Latest version Poimu548_10.EXE (5.48.10.0)
Note! Full Designer version includes also Poimu pre-selection version!
|
|
 |
Light weight purlin design software - PurCalc
• Software used for design of roof purlins produced by Ruukki
• Software that includes two interfaces: `Full designer version´ for detailed design and a simplified `Easy and quick pre-selection version´ for fast product selection and optimisation
• The software is intended to be operated by civil/structural engineers or otherwise adequately qualified persons
• Software enabling capacity verifications for the service limit state and ultimate limit state
• Design codes : ENV 1993-1-3, EN 1993-1-3
• Software license automatic registration
• Automatic latest version check
• Languages: Finnish, English, Swedish, Polish, Czech, Slovak, Hungary, Romanian
• Windows
• Installation instructions are available from here.
MORE INFO |
|
0,00€
vat 0.0%
FULL DESIGNER VERSION
Latest version PurCalc232.EXE (2.32.0.0)
Note! Full Designer version includes also PurCalc pre-selection version!
|
|
 |
Panel design tool - Traypan (NEW)
• TrayPan web application is used for design of metal faced sandwich panels made by Ruukki.
• Register to a user at Ruukki Design tools portal at https://designtools.ruukki.com – no installations needed, only web browser.
• TrayPan is intended to be operated by civil/structural engineers or otherwise adequately qualified persons.
• Software enables capacity verifications for the service limit state and ultimate limit state.
• Wind pressure and suction, and fastener design.
• Design codes: EN 14509.
• Languages: Finnish and English.
• Note! There are two versions of TrayPan available. Both versions are functional but we recommend using the latest cloud based solution. The version that requires installation will be depreciated soon.
• GO TO TRAYPAN >>
MORE INFO |
|
0,00€
vat 0.0%
|
|
 |
Panel and liner tray design software - Traypan (DEPRECIATED)
• TrayPan software used for design of roll-formed structural liner tray and metal faced sandwich panels made by Ruukki
• Software that includes two interfaces: `Full designer version´ for detailed design and a simplified `Easy and quick pre-selection version´ for fast product selection and optimisation
• The software is intended to be operated by civil/structural engineers or otherwise adequately qualified persons
• Software enabling capacity verifications for the service limit state and ultimate limit state
• Wind pressure and suction, and fastener design (also stressed skin design for liner tray)
• Design codes: ENV 1993-1-3 or EN 1993-1-3 Eurocode
• Software license automatic registration
• Automatic latest version check
• Languages: Finnish, English, Swedish, Polish, Czech, Slovak, Hungary, Romanian.
• Windows
• Note! There are two versions of TrayPan available. Both versions are functional but we recommend using the latest cloud based solution. The version that requires installation will be depreciated soon.
• Installation instructions are available from here.
MORE INFO |
|
0,00€
vat 0.0%
FULL DESIGNER VERSION
Latest version TrayPan320_10.EXE (3.20.10.0)
Note! Full Designer version includes also TrayPan pre-selection version!
|
|
The results of these programs are only applicable for Ruukki's products. These programs should not be used for design of any other products than original Ruukki products. Ruukki will not guarantee in any way whatsoever that the structure will not collapse under the loads if these programs are used for other products than original Ruukki products. "Ruukki and Ruukki's product code" must be used in all designs and drawings etc.
By downloading and using the program you agree to these terms and conditions and the General Conditions for Using Software Toolbox Portal available at Terms & privacy as well as the license terms of the program.
The software are intended primarily to be operated by civil/structural engineers or otherwise adequately qualified persons.
It shall be the user's responsibility to verify that the results of any calculation and/or data processing carried out by the software are correct and that the results are verified as correct by a qualified civil/structural engineer or otherwise adequately qualified persons.
The use of different web-browser automatic translators IS NOT ALLOWED (e.g google translator) in order to translate the whole Software Toolbox Portal or any parts of it. This causes false navigation, terminology and instructions.
