Steel Frame Design Software
The results of these programs are only applicable for Ruukki's products. These programs should not be used for design of any other products than original Ruukki products. Ruukki will not guarantee in any way whatsoever that the structure will not collapse under the loads if these programs are used for other products than original Ruukki products. "Ruukki and Ruukki's product code" must be used in all designs and drawings etc.
By downloading and using the program you agree to these terms and conditions and the General Conditions for Using Software Toolbox Portal available at Terms & privacy as well as the license terms of the program.
The software are intended primarily to be operated by civil/structural engineers or otherwise adequately qualified persons.
It shall be the user's responsibility to verify that the results of any calculation and/or data processing carried out by the software are correct and that the results are verified as correct by a qualified civil/structural engineer or otherwise adequately qualified persons.
The use of different web-browser automatic translators IS NOT ALLOWED (e.g google translator) in order to translate the whole Software Toolbox Portal or any parts of it. This causes false navigation, terminology and instructions.
 |
Truss and frame analysis and design software - WinRami
• WinRami – 2.5 D frame and truss design
• Ruukki cold formed hollow sections, welded and hot rolled I-sections
• Static analysis and section forces
• Local truss welded connection design
• Structural fire design
• Calculation results
• Codes: B7 (Fin), EN 1993 Eurocode, BSK (Swe)
• Software license automatic registration
• Automatic latest version check
• Languages: Finnish, English
• Windows XP/Vista/7
MORE INFO  |
|
29,90€
vat 0.0%
FINAL RELEASE 5.04
Note! Demo or full version of Section and Fire Protection System is required to use full capabilities of Winrami!
|
|
|
 |
Rapalkki (Hoist girder design software)
Note! This software is in finnish only!
Tällä Ratapalkki-ohjelmalla voit mitoittaa sekä siltanosturin että riippunostimen ratapalkin. Mitoitusnormina ohjelma käyttää EN 1991-3:2006, EN 1993-6:2007, EN 1993-1-1:2005, EN 1993-1-9:2005 ja EN 1993-1-5:2006 normeja. Ohjelma sisältää sekä staattisen- että väsymismitoituksen. Ohjelma sisältää seuraavat ominaisuudet:
• Mahdollisuus mitoittaa joko siltanosturin tai riippunostimen ratapalkki
• Laskee myös jatkuvan palkin statiikan (1…5 aukkoinen palkki)
• Helppo ja nopea käyttää
• Kätevät ja monipuoliset tulostukset
• Sisältää yleisimmät IPE-, HEA ja HEB-profiilit ja latta- sekä A-kiskot
• Mahdollisuus lisätä omia profiileja ja kiskoja
• Staattinen ja väsymismitoitus
• Vain I- tai H-profiilit mahdollisia (ei esimerkiksi HQ-palkkeja)
• Koko ratapalkilla sama profiili ja kisko
• Mahdollisuus lisätä toinen samanaikainen siltanosturi ratapalkille
• Ohjelmalisenssin automaattinen registeröinti
MORE INFO |
|
29,90€
vat 0.0%
Ohjelman uusin versio
3.01
|
|
 |
Intermediate Floor Girder analysis and design software - WQBeam
WQ beams are mainly used in office and other commercial buildings. Slabs can be massive reinforced concrete slabs, thin-shell slabs or hollow core slabs. Program takes account local stresses caused by transverse bending of lower flange and also torsion loads are checked. Basic loading very easy to give. Additional (point, uniform, wall) loads can be added.
Program checks the hollow core slab shear at the support. Shear capacity of hollow core slab can be increased by filling of cores and reinforcing surface slab.
• Single supported or continuous structure including cantilevers
• Possibility to design also concrete filled beam
• Skewed slab fields possible
• Installation load, Dead load, Live load and Snow load
• Structural fire design
• Complete calculation report including critical temperature
• Codes: EN 1993 Eurocode
• Software license automatic registration
• Automatic latest version check
• Languages: Finnish, English
• Windows XP/Vista/W7
MORE INFO |
|
29,90€
vat 0.0%
FINAL RELEASE 5.00.010
NOTE! Demo or Full version of WinRami 5.01.311 or later have to be installed
|
|
 |
Fire Protection System Installation
Installation of fire protection system for WQBeam, WinRami and Section programs. Supported fire protection systems at the moment are:
- Fireflex
- Firetex FX2000
- Hensoterm 3KS
- Hensoterm 4KS
- Nonfire S104
- Nullifire S607
- Nullifire S707-60
- Nullifire S707-120
Installation includes "Palosuojaselain" application user can view different fire protection materials according to each certified product declaration.
MORE INFO |
|
0,00€
vat 0.0%
Lates version Fire_Protection_System501.exe (5.01)
|
|
The results of these programs are only applicable for Ruukki's products. These programs should not be used for design of any other products than original Ruukki products. Ruukki will not guarantee in any way whatsoever that the structure will not collapse under the loads if these programs are used for other products than original Ruukki products. "Ruukki and Ruukki's product code" must be used in all designs and drawings etc.
By downloading and using the program you agree to these terms and conditions and the General Conditions for Using Software Toolbox Portal available at Terms & privacy as well as the license terms of the program.
The software are intended primarily to be operated by civil/structural engineers or otherwise adequately qualified persons.
It shall be the user's responsibility to verify that the results of any calculation and/or data processing carried out by the software are correct and that the results are verified as correct by a qualified civil/structural engineer or otherwise adequately qualified persons.
The use of different web-browser automatic translators IS NOT ALLOWED (e.g google translator) in order to translate the whole Software Toolbox Portal or any parts of it. This causes false navigation, terminology and instructions.
